YSHIELD® AF3 | Fiber additive for shielding paint | 0.9 litre
Crack-bridging additive for mixing with the YSHIELD shielding paints.
If this additive is used in the paint the conductive tape is not needed.
Free shipping
Crack-bridging additive for mixing with the YSHIELD shielding paints.
If this additive is used in the paint the conductive tape is not needed.
Free shipping
Crack-bridging additive for mixing with the YSHIELD shielding paints.
If this additive is used in the paint the conductive tape is not needed.
Free shipping
Special additive for mixing with our shielding paints.
All our shielding paints are formulated without crack-bridging carbon fibres for airless spray application.
In case of cracks forming in the substrate, this additive contains long, electrically conductive carbon fibres which guarantee the grounding even without using the grounding tape.
Processing
Stir in the additive (90 ml) into 5 litre shielding paint. Use an electric drill with a stirrer for at least for one minute, so that it mixes homogeneously.
Technical data
For the following shielding paints: MAX54, PRO54, HSF54, HSF64, NSF34
Delivery size: 90 ml
Coverage: Mix with 5 liters of shielding paint
Ingredients: Water, carbon fibers, additives, preservative (BIT, INN, MIT)
Color: Black
Frost resistant (3 frost-/thaw cycles), shippable year-round